Technical SpecificationsHardware&nbsp; <ul><li>Module conception: Plug &amp; Play</li><li>Needle configuration: 8 needles with disposable tips</li><li>Tip types: HDPE disposable tips (5-1000μl)&nbsp;</li><li>Syring size: 1000μl</li><li>Incubators: 9 independent</li><li>Washer: 3 independent</li></ul> Liquid handling features<ul><li>Pipetting precision: Volume CV (%)</li><li>Standard volume: 10 μl &lt; 5% / 100 μl &lt; 3%</li><li>Liquid detection: Pressure sensor &amp; Clot detector</li><li>Bar-code evaluation: Sample codification, plate codification, kit type codification with recording of lot number &amp; lot expiry date</li></ul> Incubator module - All incubators are integrated in modules with washer.<ul><li>Incubator modules: 3 modules that consist of 3 independent incubators&nbsp;</li><li>Shaking: Independent shaking for each position with variable speed (350 rpm to 700 rpm)</li><li>Temperature range: From 20°C (room temperature) up to 40°C with accuracy of +/- 0.5°C</li></ul> Washer module - All modules are integrated with incubator.<ul><li>Washer module: 3 washer</li><li>Manifold: 8-channel manifold</li><li>Wash channel: 4 common channels for wash buffer which are linked to 4 containers of 5 L and 2 containers of 10 L for waste/each with loading cell.</li><li>Wash mode: Strip or plate mode with or without soaking time</li></ul> Reader<ul><li>Light source: Led-light (lifetime guarantee)</li><li>Measurement range: 0-4 0 OD</li><li>Wavelenght selection: 400-700nm: 2 filters are supplied (selection between 5 of which: 405nm, 450nm, 492nm, 530nm, 630nm) upgradable up to 4 filters&nbsp;</li><li>Measurement time: Single wavelenght 10 seconds; dual wavelenght 15 seconds</li></ul> Operating lab condition<ul><li>Temperature 15°C-50°C, relative humidity 30-80%</li></ul> Dimension <ul><li>Height 1120 mm</li><li>Width 1590 mm</li><li>Depth 830 mm</li><li>Weight &lt;250 kg</li></ul>

DiaBlood_Plus.png

DiaBlood

Detection Method<ul><li>Absorbance</li></ul> Assay Rate<ul><li>200 tests / h</li></ul> Features<ul><li>Programmed protocols&nbsp;for use with all microelisa kits&nbsp;</li><li>200 tests per hour (maximum)</li><li>Batch analysis or continuous loading capability</li><li>Reflex testing (automatic dilution and retest of over-range samples)</li></ul> Specification<ul><li>PC-controlled using Windows®&nbsp;based software (A PC/Laptop with Windows®&nbsp;OS is required)</li><li>Open system allows entry of user protocols.</li><li>Reactions performed at ambient temperature, 25oC or 37oC</li><li>Assay modes: Absorbance, single standard, factor, fixed time kinetics, kinetics by standard or factor, multi-calibrator point-to-point, linear regressions, cubic spline and percentage absorbance</li><li>Bichromatic and Monochromatic reading</li><li>Includes eight long-life IAD filters with 340nm to 700nm range</li><li>Performs dilutions and pre-dilutions; dispense volumes 2 µL&nbsp;</li><li>4 optical channel heads</li><li>Liquid sensing probe tip</li><li>8-well wash head</li><li>Level-sensing wash, rinse and waste bottles</li><li>Self-monitoring mechanicals and optics</li><li>Complete QC package</li><li>LIS, STAT</li></ul>

Algen_fotolar_ai_Çalışma Yüzeyi 1 kopya 3.png

Chemwell 2910

Physical Specifications Dimensions (Metric/Non Metric)<ul><li>Width: (106cm / 42 in)</li><li>Depth: (91cm / 36 in)</li><li>Height: (80 cm / 32 in)</li><li>Footprint: (0.98 sq m / 10.5 sq ft)</li><li>Bench Weight: (136 kg (max.) / 300 lbs (max.))</li><li>Ship Weight: (244 kg (max.) / 537 lbs (max.))</li></ul> Power Supply Requirements<ul><li>Voltage: 100 – 240 V automatic conversion</li><li>Frequency: 50/60 Hz</li><li>Power Consumption: &lt; 800 VA (online UPS recommended)</li></ul> System Specifications<ul><li>Number of Plates: 4</li><li>Sample Capacity: 96 (98 positions available)</li><li>Continuous Sample: Yes</li><li>Loading: 10 mm – 16 mm diameter</li><li>Sample Tube Size: 40 mm – 100 mm</li><li>Number of Reagents: height Up to 24 (25 mL tubes)</li><li>Number of Standard/Control Bottles: 33 (1.5 mL vials)</li><li>Assays per Plate: 1 assay per strip or up to 12 assays per plate</li><li>Dilution Wells: Up to 192 deep-well strips (24 x 8)</li><li>Sample Tip Capacity: 432 (4 x 108)</li><li>Reagent Tip Capacity: 41 tips</li></ul> Reagent Pipetting Specifications<ul><li>Reagent Tip Size: 1,300 µL</li><li>Reagent Pipetting Volume: 25 μL – 1,000 µL</li><li>Reagent Pipetting Precision: ≤ 3% CV at 10 shots at any volume in operating range above 50 µL</li><li>Reagent Pipetting Accuracy: ± 2% of target volume at 50 µL or greater in operating range (single-shot mode)</li></ul> Sample Pipetting Specifications<ul><li>Sample Tip Size: 300 μL</li><li>Sample Pipetting Volume: 10 μL – 250 μL single-shot / 25 μL – 100 μL multi-shot</li><li>Sample Pipetting Precision: ≤ 3% CV at any operating volume above 10 μL (single-shot mode)</li><li>Sample Pipetting Accuracy: ± 2% of target volume at any operating volume above 10 μL (single-shot mode)</li><li>Estimated Cycle Time for Sample Pickup to Delivery on Plate: &lt; 8 seconds^</li><li>Time to Dispense: 19 minutes (typical)^ 50 μL of 96 samples to plate from sample tubes or deep-well plates</li><li>Sampling Time: &lt; 26 minutes (typical)^</li><li>w/Dilutions: Dilution Range: 1 part in 190 one-stage dilution / 1 part in 36,100 two-stage dilution</li></ul> Process Security<ul><li>Liquid Level Sensing: Yes (reagents, controls and samples)</li><li>Filter Slots: 6 wavelength</li></ul> Reader Specifications<ul><li>Photometric Range: 0.000 – 3.000 OD</li><li>Spectral Range: 405 nm – 690 nm</li><li>Accuracy: ± 0.01 OD or 2.5% (0.000 – 3.000 OD) whichever is greater</li><li>Read Time: &lt; 10 seconds, single wavelength / &lt; 20 seconds, dual wavelength</li></ul> Washer Specifications<ul><li>Manifold Configuration: 8-way</li><li>Programmable Volumes: 50 µL – 999 µL</li><li>Wash Bufer Capacity: 4 wash bottles at 2.0 L, with level-sensing</li><li>Residual Wash Volume: &lt; 3 μL per well with dual-axis sweep in a fat-bottom plate</li><li>Dispense Precision: ≤ 5% CV (with 300 μL in a 96 well plate)</li><li>Waste Container: 8 L with waste full sensor</li></ul>

dynex-foto2.png

Dynex Technical

Technical Specifications<ul><li>Capacity of 6 microtiter plates (ELISA)</li><li>Walk-Away-System</li><li>Ideal for various ELISA applications of laboratory diagnostics:</li><li>Determination of hormones, tumor markers, infectious diseases …</li><li>Up to 12 different assays at same time</li><li>Standard curve recall and recalibration</li><li>Time management system</li><li>Quality control functions</li><li>Monitoring the entire test run</li><li>No disposable tips</li><li>Flexible user interface</li><li>Removable rotating racks for reagents and sample tubes</li><li>Maximum capacity: 240 sample tubes</li><li>Simultaneous loading of up to 12 reagent sets (or up to 81 allergens)</li><li>Pipettier speed serum: 700 samples/hour</li><li>Pipettier speed reagents: 1500 Wells/Hour</li><li>Washing volume: programmable from 100 to 350 µl</li><li>Number of cycles: programmable from 1 to 9 cycles</li><li>Impact time: programmable from 1 second to 3 minutes</li><li>Pressure: programmable</li><li>The normally provided filters: 405, 450, 492, 550 and 620 nm</li><li>Reader range: 0-3 OD in Bichromatism; 0-9 OD in polychromatism</li><li>Programming and changing test protocols</li><li>Insert work lists with all relevant patient data</li><li>Monitoring the entire test run</li><li>View and manage the final results</li><li>Personalizing and printing the patient report</li><li>Standard curve retrieval function</li><li>T. M. S. (Time Management System)</li><li>Quality control functions</li><li>Compatible with laboratory information systems</li></ul>

Micro Eliza Automatic Systems

DiaBlood

Chemwell 2910

Dynex Technical

ALISEI

Algen Diagnostik

Email newsletter

Products